- August 15, 2020
- By Rizwan Akram
- In Blog
- Tags Diagnostic Trouble Codes, Prius, Toyota
- 7856
- 0
The Toyota Prius C1259 and P0A0D errors are diagnostic trouble codes that relate to the hybrid system of the vehicle. The C1259 code specifically indicates a malfunction in the regenerative brake system, which is responsible for capturing and converting kinetic energy back into electrical energy to charge the hybrid battery. This malfunction could be attributed to issues with the brake actuator, brake fluid, or other related components. On the other hand, the P0A0D code points towards a problem in the hybrid powertrain control module, which manages the interactions between the gasoline engine, electric motors, and battery pack. Detecting and resolving these error codes promptly is crucial to ensure the efficient and smooth operation of the Toyota Prius’s hybrid system, contributing to both fuel efficiency and environmental sustainability. If either of these codes is illuminated on the vehicle’s dashboard, it is advisable to seek professional assistance to diagnose and rectify the underlying issues.
Fixmycar.pk has a trained Hybrid vehicles handling team for Toyota c1259 error. We are in service for last 05 years and specialize in home services for all make and models of cars. Our team received a call from a customer that a Toyota Prius is not starting or moving and after showing the car to multiple workshops all are saying to change the battery pack, the vehicle was totally disabled.
Some Errors Associated with Hybrid System
Please note that Prius has around 210 VDC in its system, extreme precautions must be taken to handle the electronics of the car. The Auxiliary battery was also found to be weak so replaced with new one.
The old oil that came out was hardly 1 Ltr and it had also triggered the engine oil low safety program to prevent engine damage.
The vehicle is now perfect and drive-able after removing of Toyota Prius c1259 error. Installation of all equipment done after testing.
Maintenance mode activation, Error removal and calibrations
Our hybrid battery fan service includes:
• Removing all panels necessary to access HV battery fan.
• Cleaning hybrid battery fan or duct assembly, Scan and Reset of controller
Cost is Rs. 3500/- (approximately) inclusive of scan and inspection
Time (Takes about 2 hours)
Complete Removal of all parts and servicing each and every part , tear down of Power unit (Honda & Toyota Vehicles only) is also available as a on-site service (Time 04 Hrs.)
Call at 0331-2227989 to make your appointment for a hybrid battery fan service.
Follow Us